Next-generation indoor switch for all-optical networks, supporting hybrid cables and fit for office, production, device, and warehouse networks in campus scenarios
The switch supports hybrid cable connection and dual 10GE uplinks. The simple networking and SDN technology provide campus services with a high-bandwidth, low-latency, highly flexible infrastructure that features simplified O&M.
Hybrid cable connection enables integrated power and optical transmission. Cables are pre-buried on a cable tray under the workbench, offering tidy and clear cabling.
Model (Non-PoE) |
RG-PF2920-8GT2MG2XS |
|
Fixed ports |
8 x 10M/100M/1000M auto-negotiation electrical ports 2 x GE/2.5GE auto-negotiation electrical ports 2 x 10GE SFP/SFP+ ports |
|
Switching capacity |
66 Gbps |
|
Packet forwarding rate |
49.1 Mpps |
|
SFP+ port |
10GBase-R and 1000Base-X supported |
|
Power supply |
Powered by a hybrid cable from the PoF switch 2 x PoE inputs (802.3at): PoE-IN1 and PoE-IN2 Rated voltage range: 44 V to 57 V Rated current: 0.5 A |
|
Leakage current to ground |
≤ 3.5 mA |
|
EEE energy saving |
Supported |
|
PoE output |
Not supported |
|
Max. power consumption |
< 20 W |
|
Operating temperature |
Installed on a wall or cable tray or in a rack: 0ºC to 55ºC (32ºF to 131ºF) at a height below 1,800 m (1.12 miles) above the sea level Note: At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the maximum operating temperature decreases by 1°C (1.8°F) for every increase in altitude of 220 m (721.78 ft.). |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
10% to 90% RH |
|
Storage humidity |
5% to 95% RH |
|
Fan |
Fanless design, natural cooling |
|
Intelligent temperature control |
The temperature alarm and overheat protection functions are supported. |
|
Electromagnetic compatibility (EMC) |
GB/T 9254.1-2021 |
|
Safety standard |
GB 4943.1-2022 |
|
Dimension (W x D x H) |
210 mm x 235 mm x 55 mm (8.27 in. x 9.25 in. x 2.17 in.) |
|
Weight |
2.75 kg (6.06 lbs, including the package) |
Model (Non-PoE) |
RG-PF2920-8GT2MG2XS |
|
Max. number of MAC address entries |
Static MAC addresses MAC address filtering |
|
802.1Q VLAN |
4K IEEE 802.1Q VLANs Port-based VLAN MAC-based VLAN Private VLAN Protocol-based VLAN GVRP VLAN Voice VLAN |
|
QinQ |
Basic QinQ Selective QinQ |
|
Port aggregation |
Load balancing LACP dynamic aggregation The LACP priority, negotiation mode, and maximum number of ports that can be aggregated can be configured. VSU aggregated port |
|
Mirroring |
One-to-one mirroring, one-to-many mirroring, and many-to-one mirroring Flow- and VLAN-based SPAN RSPAN and ERSPAN |
|
DHCP |
DHCP server DHCP client DHCP relay DHCP Snooping |
|
IP routing |
Static black hole routing, RIP, OSPF, and RIPng |
|
ACL |
Standard IP ACL (IP-based hardware ACL) Extended IP ACL (hardware ACL based on the IP address or TCP/UDP port ID) Extended MAC ACL (hardware ACL based on the source MAC address, destination MAC address, and optional Ethernet type) ACL 80 IPv6 ACL Global ACL ACL redirection |
|
QoS |
Port traffic identification Port traffic rate limiting IEEE 802.1p/DSCP traffic classification Queue scheduling mechanisms such as SP, WRR, DRR, WFQ, SP+WFQ, SP+WRR, and SP+DRR |
|
Security |
Filtering of invalid MAC addresses Broadcast storm suppression Hierarchical management and password protection RADIUS and TACAS+ SSH and SSH V2.0 CPP and NFPP Port protection |
|
EEE |
EEE LPI mode on ports of the IEEE802.3az standard |
|
Management |
SNMP, Telnet, Web, RMON, FTP, TFTP, NTP/SNTP, RLDP, and Syslog/Debug |
Reviews (0)