Fit for data centers, MANs, campus networks, and scenarios with data centers and campus networks
Special optical port protection and separate optical port power supply design, isolating a faulty module without affecting services on other ports Rapid service restartion on the corresponding port after the faulty module is replaced
Hardware Specifications |
N18014-E |
|
Interface Specifications |
||
Power module |
4 |
|
Fan module |
2 |
|
Fixed management port |
1 x MGMT port, 1 x console port, and 1 x USB port |
|
Supervisor module slot |
2 |
|
Line card slot |
12 |
|
Switch fabric module slot |
4 |
|
System Specifications |
||
Packet forwarding rate |
21,000 Mpps |
|
System switching capacity |
28.8 Tbps |
|
Number of MAC address |
● Number of static MAC addresses XA card: 4,000 XB card: 10,000 ● Number of global MAC addresses XA card: 96,000 XB card: 256,000 |
|
ARP table size |
XA card: 40,000 XB card: 96,000 |
|
Number of IPv4 unicast routes |
XA card: 64,000 (shared with IPv6 routes) XB card: 350,000 (shared with IPv6 routes) |
|
Number of IPv4 multicast routes |
XA card: 4,000 XB card: 4,000 |
|
Number of IPv6 unicast routes |
XA card: 15,000 (≤ 64 bytes, shared with IPv4 routes) XB card: 65,000 |
|
Number of IPv6 multicast routes |
XA card: 2,000 XB card: 2,000) |
|
Number of ACEs |
● XA card: Ingress: 7,000 Egress: 1,500 ● XA card: Ingress: 28,000 Egress: 4,000 |
|
Number of VSU members |
2 |
|
Dimensions and Weight |
||
Dimensions (W x D x H) |
482.6 x 570.7 x 605.1 mm (19.00 in. x 22. 47 in. x 23.82 in.), 14 RU |
|
Weight (empty chassis and fan modules) |
68.3 kg (150.58 lbs) |
|
CPU and Storage |
||
CPU |
Supervisor module: M18000E-CM : 2.2 GHz quad-core processor Line card: XA/XB/FE card: 2.2 GHz quad-core processor |
|
Storage |
Supervisor module and line card: Flash memory: 8 GB SDRAM: DDR4 4 GB |
|
Power and Consumption |
||
Maximum power consumption |
M18000E-CM: 60 W M18000E-48GT4XS-XA: 85 W M18000E-48SFP4XS-XA: 117 W M18000E-24GT8SFP8XS-XA: 95 W M18000E-32XS-XB: 149 W M18000E-52XS-XB: 250 W M18000E-12CQ-XB: 240 W M18010E-FE-X I: 50 W M18000E-FE-X II: 160 W M14FAN-F: 360 W |
|
Maximum output power |
RG-PA600I: 600 W RG-PD600I: 600 W RG-PA1600I: ● 90 to 180 V AC; 1,200 W ● 180 to 264 V AC; power: 1,600 W RG-PD1600I: 1,400 W |
|
Rated input voltage |
● RG-PA600I: 100–120 V, 200–240 V, 50/60 Hz ● RG-PD600I: –48 V DC ● RG-PA1600I: 100–120V, 200–240 V, 50/60 Hz ● RG-PD1600I: –48 V DC |
|
Maximum input voltage |
● RG-PA600I: 90–264 V, 47–63 Hz ● RG-PD600I: –40 V DC to –75 V DC ● RG-PA1600I: 90–264 V, 47–63 Hz ● RG-PD1600I: –40 V DC to –75 V DC |
|
Environment and Reliability |
||
MTBF |
≥ 200,000 hours |
|
Primary airflow |
Line card: Side-to-rear airflow Supervisor module/FE: Front-to-rear airflow |
|
Operating temperature |
0°C to 50°C (37°F to 122°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
10% to 90% RH (non-condensing) |
|
Storage humidity |
5% to 95% RH (non-condensing) |
|
Operating noise |
55.9 dB at the temperature of 35°C (95°F) 73.4 dB at the temperature of 50°C (122°F) |
|
Interface surge protection |
Power port: 6 kV Telecom port: 4 kV (MGMT port) |
|
Operating altitude |
–500 m to +5,000 m (–1640.42 ft. to +16404.20 ft.) |
Reviews (0)