Indoor high-quality network scenarios in the higher education, manufacturing industry and medical industry
The RG-AP820-I is a Wi-Fi 6 wireless access point that integrates dual radios, high performance, and enterprise-grade encryption technology. Due to the hybrid cloud management mode and high-density access design, it is suitable for flexible deployment in high-quality network scenarios, such as classroom, dormitory, and office scenarios in the education industry, production workshop and warehouse scenarios in the manufacturing industry, and outpatient clinics and mobile ward rounds scenarios in the medical industry.
Dual-band design (2.4 GHz + 5 GHz), four spatial streams, 1024-Quadrature Amplitude Modulation (QAM) high-speed access, and up to 2.976 Gbps peak data rate, realizing high-speed wireless access experience Orthogonal Frequency-Division Multiple Access (OFDMA), Multi-User Multiple-Input Multiple-Output (MU-MIMO), and Wi-Fi Multimedia (WMM), increasing the average rate per user in high-density deployment environments
RF power adjustment and intelligent channel allocation to solve the problems such as co-channel interference and adjacent channel interference, thereby improving network transmission efficiency and stability
Local and cloud management modes, and intelligent wireless network optimization, reducing TCO and maximizing ROI Access through optical and Ethernet cables for flexible networking and high-speed backhaul over 2.5 Gbps optical links IEEE 802.11k/v/r support and roaming stickiness optimization, achieving seamless user roaming Rich IoT features: PoE output, Bluetooth 5.1, and wireless locating
Encryption and authentication technologies including Wi-Fi Protected Access 3 (WPA3), enhanced open security, 802.1X, and Private Pre-shared Key (PPSK), enhancing data security Dynamic Frequency Selection (DFS), optimizing the use of available RF spectrum to prevent radar channel interference Cyclic Delay/Shift Diversity (CDD/CSD), Maximum Ratio Combining (MRC), Space-Time Block Coding (STBC), and Low-Density Parity Check (LDPC), improving the signal quality, signal receiving, and reliability and performance of data transmission
Transmit beam-forming (TxBF) expands the signal coverage and enhances the reliability of specific devices, thereby improving the data rate Intelligent identification and monitoring, multicast-to-unicast conversion, and other features, enhancing network security and reliability
The RG-AP820-I, a dual-band wall-mounted wireless access point, is ideal for a wide range of applications, including higher education, government, general education, finance, and business sectors, providing flexible solutions to meet diverse service needs.
The RG-AP820-I supports various wireless protocols, such as 802.11ax, 802.11ac Wave2, 802.11ac Wave1, and 802.11n. It features a hardware-independent dual-band design to deliver a data rate of up to 2.976 Gbps, effectively eliminating wireless performance bottlenecks. Additionally, it is compatible with an extensive array of devices, promoting seamless interconnectivity among employees and customers.
The RG-AP820-I stands out with its exceptional wireless network security, RF control, mobile access, QoS guarantee, and seamless roaming. With Ruijie's wireless access controller (AC), it enables wireless user data forwarding, security, and access control to cope with diverse service needs.
The RG-AP820-I supports both local power supply and Power over Ethernet (PoE), providing you with the flexibility to choose the power supply mode. In addition, the RG-AP820-I can be mounted against a wall or ceiling, making space deployment and environmental requirements less challenging. This makes the RG-AP820-I particularly suitable for scenarios such as large campuses, conference centers, enterprise offices, and operation hotspots.
Hardware Specifications |
RG-AP820-I |
802.11n |
Four spatial streams ● Radio 1 – 2.4 GHz: 2x2 MIMO, two spatial streams ● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz and 40 MHz Combined peak data rate: 600 Mbps ● Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15 ) ● Radio 2 – 5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS31) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
802.11ac |
Two spatial streams ● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 1.733 Gbps ● Radio 2 – 5 GHz: 6.5 Mbps to 1.733 Gbps (MCS0 to MCS9) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
802.11ax |
Four spatial streams ● Radio 1 – 2.4 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams ● Radio 2 – 5 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 2.976 Gbps: ● Radio 1 – 2.4 GHz: 8.6 Mbps to 0.574 Gbps (MCS0 to MCS11) ● Radio 2 – 5 GHz: 8.6 Mbps to 2.402 Gbps (MCS0 to MCS11) Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) WPA3 |
Antenna |
Wi-Fi ● 2.4 GHz: two built-in omnidirectional smart antennas, the max. antenna gain is 3 dBi. ● 5 GHz: two built-in omnidirectional smart antennas, the max. antenna gain is 3 dBi. Bluetooth ● One onboard omnidirectional antenna, the max. antenna gain is 2.4 dBi. |
Port |
1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation 1 x 2.5GE combo SFP port (10/100/1000Base-T electrical port), conformity to 1GE SFP 1 x RJ45 console port (serial console port) 1 x Bluetooth 5.1 |
Status LED |
1 x multi-color system status LED ● AP power-on status ● Software initialization status and upgrade status ● Uplink service interface status ● Wireless user online status ● CAPWAP tunnel timeout ● Specific AP locating |
Button |
1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings. |
Dimensions (W x D x H) |
Main unit: 220 mm x 220 mm x 49 mm (8.66 in. x 8.66 in x 1.93 in.) Shipping: 507 mm x 319 mm x 278 mm (19.96 in. x 12.56 in. x 10.94 in.) |
Weight |
Main unit: 0.6 kg (1.33 lbs) Mounting bracket: 0.2 kg (0.44 lbs) Shipping: 1.04 kg (2.29 lbs) |
Mounting |
Wall/Ceiling-mount (a mounting bracket is delivered with the main unit) |
Lock option |
Kensington lock and securing latch |
Input power supply |
The AP supports the following two power supply modes: ● 48 V/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power supply needs to be purchased independently. ● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE). Note: If both DC power and PoE are available, DC power is preferred. |
Power consumption |
Maximum power consumption: 12.95 W ● DC power: 12.95 W ● 802.3bt (PoE++): 12.95 W ● 802.3at (PoE+): 12.95 W ● 802.3af (PoE): 12.95 W ● Idle mode: 6 W |
Environment |
Storage temperature: –40°C to +70°C (–40°F to +158°F) Storage humidity: 0% RH to 95% RH (non-condensing) Operating temperature: –10°C to +50°C (14°F to 122°F) Operating humidity: 0% RH to 95% RH (non-condensing) At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 166 m (546.81 ft.), the maximum temperature decreases by 1°C (1.8°F). |
Mean Time Between Failure (MTBF) |
200,000 hours (22 years) at the operating temperature of 25°C (77°F) |
System memory |
512 MB DRAM, 128 MB flash |
Max. transmit power |
2.4 GHz: 26 dBm (398 mW) 5 GHz: 26 dBm (398 mW) Note: ● Adjusting the transmit power by percentage (recommended) and in 1dBm increments ● The transmit power is limited by local regulatory requirements. |
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
Radio Frequency Performance |
RG-AP820-I |
||
Frequency Band and Protocol |
Data Rate |
Max. Transmit Power per Transmit Chain |
Max. Receive Sensitivity per Receive Chain |
2.4 GHz 802.11b |
1 Mbps |
23 dBm |
–91 dBm |
2 Mbps |
23 dBm |
–91 dBm |
|
5.5 Mbps |
23 dBm |
–90 dBm |
|
11 Mbps |
23 dBm |
–87 dBm |
|
2.4 GHz 802.11g |
6 Mbps |
23 dBm |
–89 dBm |
24 Mbps |
22 dBm |
–82 dBm |
|
36 Mbps |
22 dBm |
–78 dBm |
|
54 Mbps |
20 dBm |
–72 dBm |
|
2.4 GHz 802.11n (HT20) |
MCS0 |
23 dBm |
–85 dBm |
MCS7 |
19 dBm |
–67 dBm |
|
2.4 GHz 802.11n (HT40) |
MCS0 |
23 dBm |
–82 dBm |
MCS7 |
19 dBm |
–64 dBm |
|
2.4 GHz 802.11ax (HE20) |
MCS0 |
23 dBm |
–85 dBm |
MCS11 |
15 dBm |
–58 dBm |
|
2.4 GHz 802.11ax (HE40) |
MCS0 |
23 dBm |
–82 dBm |
MCS11 |
15 dBm |
–54 dBm |
|
5 GHz 802.11a |
6 Mbps |
23 dBm |
–89 dBm |
24 Mbps |
22 dBm |
–82 dBm |
|
36 Mbps |
22 dBm |
–78 dBm |
|
54 Mbps |
20 dBm |
–72 dBm |
|
5 GHz 802.11n (HT20) |
MCS0 |
23 dBm |
–85 dBm |
MCS7 |
19 dBm |
–67 dBm |
|
5 GHz 802.11n (HT40) |
MCS0 |
23 dBm |
–82 dBm |
MCS7 |
19 dBm |
–64 dBm |
|
5 GHz 802.11ac (VHT20) |
MCS0 |
23 dBm |
–85 dBm |
MCS9 |
18 dBm |
–60 dBm |
|
5 GHz 802.11ac (VHT40) |
MCS0 |
23 dBm |
–82 dBm |
MCS9 |
18 dBm |
–57 dBm |
|
5 GHz 802.11ac (VHT80) |
MCS0 |
23 dBm |
–79 dBm |
MCS9 |
18 dBm |
–53 dBm |
|
5 GHz 802.11ax (HE20) |
MCS0 |
23 dBm |
–85 dBm |
MCS11 |
16 dBm |
–58 dBm |
|
5 GHz 802.11ax (HE40) |
MCS0 |
23 dBm |
–82 dBm |
MCS11 |
16 dBm |
–54 dBm |
|
5 GHz 802.11ax (HE80) |
MCS0 |
23 dBm |
–79 dBm |
MCS11 |
16 dBm |
–52 dBm |
|
5 GHz 802.11ax (HE160) |
MCS0 |
23 dBm |
–77 dBm |
MCS11 |
16 dBm |
–50 dBm |
Reviews (0)