Recommended for deployment in schools, hotels, medical care, office, production workshops, etc.
All-optical architecture, point-to-point power supply for APs through hybrid cables High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades
24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network
The connection distance between the master and micro APs is up to 1,100 m, realizing central management.
The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.
The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.
Full 2.5G downlink optical ports, allowing high-speed transmission of APs Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs
Dimensions and Weight |
RG-AM5528-SF |
Dimensions(W × D × H) |
Main unit: 442 mm × 315 mm × 43.6 mm (17.40 in. x 12.40 in. x 1.72 in.) Shipping: 538 mm × 438 mm × 173 mm (21.18 in. x 17.24 in. x 6.81 in.) |
Rack height |
1 RU |
Weight |
Main unit: 4.6 kg (10.14 lbs) Shipping: 6.38 kg (14.06 lbs) |
Installation |
Rack-mounted |
System Specifications |
RG-AM5528-SF |
Switching capacity |
880 Gbps/7.92 Tbps |
Packet forwarding rate |
426 Mpps/600 Mpps |
System Specifications |
RG-AM5528-SF |
Switching capacity |
880 Gbps/7.92 Tbps |
Packet forwarding rate |
426 Mpps/600 Mpps |
Power Supply and Consumption |
RG-AM5528-SF |
Input power supply |
One 550 W built-in power module (AC input and DC output) ● Input voltage: 176 V AC to 240 V AC Frequency: 50 Hz to 60 Hz Rated input current: 4 A ● Output voltage: 12 V DC for the master AP and 54 V DC for the external unit |
Max. Power consumption |
Max. power consumption: 530 W Without load: < 42 W With full load: < 530 W |
Environment and Reliability |
RG-AM5528-SF |
Temperature |
Operating temperature: 0ºC to 45ºC (32°F to 113°F) Note: At an altitude between 1,800 m (5,906 ft.) and 5,000 m (16,404 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F). Storage temperature: –40°C to +70°C (–40°F to +158°F) |
Max. operating height |
5,000 m (16,404 ft.) |
Humidity |
Operating humidity: 10% RH to 90% RH Storage humidity: 5% RH to 95% RH |
Surge protection |
● AC power connector Differential mode: ± 6 kV Common mode: ± 6 kV ● Hybrid cable connector Differential mode: ± 2 kV Common mode: ± 6 kV |
Fan |
Support for fan speed regulating and alarm function |
Shock and vibration standard |
GB/T 2423 |
Environment standard |
Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995 |
Mean Time Between Failure (MTBF) |
69.23 years at the operating temperature of 25°C (77°F) |
Basic Function |
RG-AM5528-SF |
Applicable software version |
RGOS12.5(4)B0404P1 or later |
Security and Authentication |
|
ACL |
IPv6 ACL Time range-based ACL Egress ACL based on a Layer 2 physical interface or aggregate interface Ingress ACL based on a Layer 2 physical interface or aggregate interface Egress ACL based on a Layer 3 interface Ingress ACL based on a Layer 3 interface |
CPP |
CPU Protect Policy (CPP) |
NFPP |
Network Foundation Protection Policy (NFPP) |
Routing and Switching |
|
MAC |
MAC address learning and aging Static and dynamic MAC addresses Source MAC address filtering Limitation on the number of MAC addresses learned on an interface |
Ethernet |
Jumbo frame length: 1,518 bytes IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP) |
VLAN |
Interface-based VLAN assignment Max. number of SVIs: 1,000 Max. number of VLANs: 4,094 VLAN ID range: 1 to 4,094 |
ARP |
ARP entry aging, gratuitous ARP learning, and proxy ARP Max. number of ARP entries: 24,000 ARP check |
IPv4 services |
Static and dynamic IPv4 addresses DHCP server and DHCP client DHCP snooping DNS client and DNS proxy NTP server, NTP client, and SNTP client |
IPv6 services |
Static and dynamic IPv6 addresses. Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, and IPv6 ping DNSv6 client NTPv6 server and NTPv6 client |
IP routing |
IPv4/IPv6 static routing Max. number of static IPv4 routes: 1,000 Max. number of static IPv6 routes: 1,000 Static black hole routing |
Multicast |
Multicast-to-unicast conversion IGMP snooping |
Network Management and Monitoring |
|
Network management |
SNMPv1/v2c/v3 Fault detection and alarm |
Network management platform |
Web management (Eweb) |
User access management |
Console, Telnet, SSH, TFTP client, TFTP server, FTP server and FTP client |
Reviews (0)